Set up your clock

Plug it in, set the time, set your alarm. Under a minute.

The four buttons on the side of the clock base

The 4 buttons

Count them from the front of the base, 1 to 4.

1 Alarm on / off. Press to turn the alarm on or off.
2 Clock setting. Hold for about 3 seconds to set the time. While setting, it lowers the number (-).
3 Alarm setting. Hold for about 3 seconds to set the alarm. While setting, it raises the number (+).
4 Sound. Press to choose your sound. While setting the alarm, it switches between hours and minutes.

Set the time

  1. Plug the clock in with the USB cable.
  2. Hold button 2 for about 3 seconds.
  3. Press button 3 to go up or button 2 to go down.
  4. Stop pressing. After about 3 seconds it saves by itself.

Set the alarm

  1. Hold button 3 for about 3 seconds.
  2. Press button 4 to switch between hours and minutes.
  3. Press button 3 to go up or button 2 to go down.
  4. Stop pressing. After about 3 seconds it saves by itself.
  5. Make sure the alarm is on with button 1.
No confirm button needed. Just stop pressing and the clock saves your setting after about 3 seconds.

Something not right?

Email support@thepitlaneclock.com with a short video of the clock and we'll sort it out fast. If it arrived damaged or doesn't work, we send you a new one.